The Zone Controllers offer extended utility to the DriveRack�and ZonePRO families. The ten Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ�45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.The ZC�1 provides programmable remote volume control for the DriveRack 260, 220i and the ZonePRO products. The ZC�2 offers programmable volume and mute control for the DriveRack 220i, 260 and the ZonePRO products. The ZC�3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products. The ZC�4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for the ZonePro products. The ZC�6 is a programmable volume control for the ZonePRO products. The ZC�7 is a programmable pushto� talk page assignment controller for the ZonePRO devices. The ZC�8 provides both programmable source selection and volume control to the ZonePro products. The ZC�9 provides source selection for the ZonePRO 1260 and 1261. The ZC�BOB allows home run or parallel wiring to the DriveRack and ZonePro products. The ZC�FIRE is a dedicated fire safety interface for the ZonePRO products that allows selection of either system mute or scene selection upon being triggered by either a relay or control voltage from the fire safety system. For more information please visit www.driverack.com or www.dbxpro.com.Features: * Programmable Volume Control * Program or Scene Selection * Programmable Contact Closure Interface * Up to 1000 ft. on CAT 5 Cable * Programmable Push�To�Talk Paging * Programmable Source SelectionArchitects� and Engineers� Specifications:ZC�BOBThe remote device shall provide up to 6 RJ�45 input jacks for Home Run or parallel wiring configurations of the dbx ZC wall panel controllers, and one output RJ�45 jack for connection to the dbx DriveRack or ZonePro device. The device shall be a dbx ZC�BOB remote controlle |
