The craftsmanship of the 786 is as stunning as the engineering is innovative. A striking blue front panel machined from 1/4 aircraft aluminum, hand-crafted solid aluminum knobs, LEDs mounted individually in machined stainless steel housings, custom VU meters with peak indicators, and heavy gauge chassis solidify the 786 as the benchmark preamplifier for decades to come. The 786 combines the best preamplifier features and an absolutely pristine audio path. In addition to having +48V phantom power as well as a phase reverse switch, the 786 also features a patent-pending EQ circuit called spectrum with frequency cut and boost up to 40kHz. An 11-position coarse gain switch sets the gain between +10 and +60 dB, while the fine gain control varies between -3 and +3 dB. Levels may be monitored on peak-program VU meters with adjustable reference levels. The signal path consists of a transformer-coupled, discrete-design premium input stage utilizing the proprietary dbx M8 Mic Pre-Amp Module.
Spectrum, a unique variable high-frequency equalization circuit employed in the mic pre-amp enhances the high frequency spectral content of the signal while maintaining phase integrity. The Detail control varies the amount of high frequency shelving boost at the frequency determined by the Spectrum control. The combination of the Spectrum and Detail controls allow pristine high frequency equalization adjustments without the added hash of traditional high-frequency EQ topologies. Premium active electronics, precision 0.1% and 1% metal film resistors, great sounding temperature stable polypropylene capacitors, high-reliability board-to-board connectors with gold-palladium-nickel contacts, Jensen� transformers, gold plated Neutrik� XLRs, rare earth magnet relays with gold contacts in a hermetically sealed nitrogen environment, military grade glass epoxy circuit boards, to mention a few, contribute to the most technologically advanced preamplifier in the world.
786 Features/Specifications
The dbx Blue Series Solid State Mic Pre-Amp is a 2U two-channel precision mic pre companion product to the 160S Stereo Compressor/Limiter. We refer to this as a precision mic pre-amp as it is designed to provide the truest reproduction of the microphone source as is electronically possible, as opposed to FX mic pre-amps. The pre-amp features the ubiquitous +48V phantom power, 20 dB pad, and phase invert functions, but also includes a switchable super low Z setting which optimizes the pre-amp performance for microphones with very low source impedance. An 11-position coarse gain switch sets the gain between +10 and +60 dB, while the fine gain control varies between -3 and +3 dB. Levels may be monitored on peak-program VU meters with adjustable reference levels.
The signal path consists of a transformer-coupled, discrete-design premium input stage utilizing the proprietary dbx M8' Mic Pre-Amp Module. The minimum signal path design routes the amplified signal directly to a patented high output drive circuit. Each stage throughout the mic pre-amp is small-signal square wave compensated to assure precise phase alignment at all audio frequencies.
Two output options will be available for the mic pre; an analog card that parallels one extra high drive output per channel acting as a premium signal splitter, and a dbx Type IV Conversion System' card that provides proprietary analog-to-digital conversion for both channels with both AES/EBU and S/PDIF outputs.
The dbx Blue Series Solid State Mic Pre has patented high-precision, high-drive, transformer-coupled output stages capable of performing with incredible accuracy and sonic transparency in virtually any audio environment. The custom designed transformer, coupled with a discrete distortion canceling driver circuit, is capable of driving 1000 feet of Belden 8451 cable terminated with a 150 ohm load, while maximum drive levels exceed +30 dBm. Yet this output stage exhibits remarkably low distortion levels, immeasurable using standard audio test equipment.�130dB of Dyanmic Range�High-Drive output transformer circuit drives 1000 ft. of Belden� cable at +30dBu with only .007% THD�+48V Phantom Power, Phase Reverse, -20dB Input Pad�Super Low-Z input switch for low impedance mircrophones or altering the microphone's sonic character�Proprietary High Frequency EQ circuit with cut/boost to 40kH |
