Crown XTi-2000 :: Professional Amps :: Amplifiers :: Pro Audio :: Audiolines.com - Pro Audio, DJ Equipment, A/V and Lighting Discount Distributor.

DJ Equipment
Pro Audio and Lighting
The Web's Lowest Prices

5070 N. Kimberly
Chicago, IL 60630

J2 Electronics Group LTD.

Home

Terms & Conditions

Contact Us

Help & Support

About Audiolines.com

Recover password

FAQ

Deals of the Day

Cortex dMIX-300 | DJ Equipment at audiolines.com

Cortex dMIX-300
List price: $639.00
As Low As: $299.00

Chauvet 3D Magic | DJ Equipment at audiolines.com

Chauvet 3D Magic
List price: $199.00
As Low As: $90.00

Crown XTi-2000 | DJ Equipment at audiolines.com

Crown XTi-2000
List price: $799.00
As Low As: $699.00

If the above search doesn't work, try this one:

Authentication

Your cart

	Cart is empty

Manufacturers

Save with twitter!

follow Audiolines on Twitter

Crown XTi-2000

Click to enlarge

Speaker presets, an LCD screen, and a universal power supply!

1,000W/ch @ 2 ohms, 800W/ch @ 4 ohms, 475W/ch @ 8 ohms, 2,000W bridged mono @ 4 ohms, 1,600W bridged mono @ 8 ohms.

The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. All are rugged, lightweight, and feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon©, and binding-post outputs, short-circuit protection and more.

Crown XTi 2000 Power Amplifier Specifications:

* Voltage Gain at 1kHz, 8 ohm rated output:
* XTi 1000: 30.5dB _XTi 2000: 32.9dB_XTi 4000: 34.2dB

Frequency Response: ±0.25 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms

Phase Response (at 1 watt, 20 Hz to 20 kHz): ±15ø

Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode

Sensitivity: 1.4V

Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): _105 dB (A weighted).

Damping Factor: Better than 500 from 20 Hz to 500 Hz.

Crosstalk: > 80 dB below rated power, 20 Hz to 1 kHz.

Common Mode Rejection (CMR): > 45 dB from 20 Hz to 1 kHz._Input Stage: Input is electronically balanced and employs precision 1% resistors.

Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.

Maximum Input Signal: +22 dBu typical

AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V _50/60 Hz

AC Line Current:
* XTi 1000: 6.5A_XTi 2000: 6.9A_XTi 4000: 8.0A

At Idle: Draws no more than 90 watts.

Operating Temperature: 0ø C to 40ø C at 95% relative humidity (non-condensing).

DSP Section

EQ: 4-band paragraphic per channel, boost/cut ±12 dB. Also adjustable high and low shelving filters

Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24 dB per octave. High and low shelving filters, one per channel

Delay: For signal alignment of driver; 5 mS total delay

Subharmonic Synthesizer: Adds low-frequency content

Output limiter: Prevents clipping

Presets: 10 user speaker presets

Front Panel Controls and Indicators

Level: Detented rotary level control, one per channel

Power Switch: On/off switch applies AC power to the amplifier

Sel/Prev/Next Buttons: Three buttons near the LCD screen are used to access menu items

LCD Screen: Backlit liquid crystal display shows speaker presets

Signal Indicator: Green LED, one per channel, flashes when a very low-level signal is present at input

10 Indicator: Green LED flashes when output signal exceeds 10 dB below clip.

20 Indicator: Green LED flashes when output signal level exceeds 20 dB below clip

Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio

Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion

Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or excessive temperature conditions

Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power

Rear Panel Controls and Connectors

AC Line Connector: NEMA 5-15P (15A)

Input Connector: XLR, one per channel

Link/Out Connector: Loop-thru signal from input connector for linking

Crown XTi 2000 Power Amplifier Features:

* Integrated proprietary DSP with LCD front panel display
* Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
* Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
* Extremely versatile, handling a wide range of speaker impedances and outputs
* Switch-mode universal power supply
* Speaker presets for crossover frequencies, EQ, limiting, and delay
* All products fill 2U rack spaces and weigh under 17 pounds
* Speakon© and binding post outputs, XLR inputs and loop-thrus
* Comprehensive LED status per channel
* 3-year, no-fault, fully-transferable warranty

13%

Details


SKU	SKU172321
Your Price:	$699.00

Options

Quantity

Add to cart

Add to wish list

Send to friend

Copyright © 2002-2010 J2 Elctronics Group LTD dba audiolines.com
Audiolines.com® and AudioDistributing.com® are registered trademarks of J2 Electronics Group LTD. All Rights Reserved.
Pricing,specifications, availability and terms of offers may change without notice, are not transferable and are valid only for new purchases from Audiolines.com. Taxes, fees and shipping charges are extra, vary and are not subject to any discounts. Audiolines.com cannot be responsible for printing errors, changes or omissions (including prices), incorrect manufacturer's specifications or changes, consequences of misuse of site and its functions, or any other inaccuracies in any product included in the Audiolines.com catalog or website. Orders subject to cancellation by Audiolines.com. All sales are subject to Audiolines.com's Terms and Conditions.
HTML Catalog