2500W @ 4 Ohms bridged* Easily switchable mono/stereo/bridged mono operating modes* Separate Speakon� outputs for Channel A and Channel B* Third Speakon output for mono bridged applications: also provides both output channels on a single NL4 connector 30Hz subsonic filter for low-frequency speaker protection* Handles for easy transport and protection of level controls* Defeatable clip limiter Front-panel signal and overload indicationSpecifications* Juice amps For all you audio geeks out there who really want the nitty gritty details.* Continuous Sine Wave Average Output Power per channel, both channels driven, 20 Hz to 20 kHz* J�2500 2 ohms: 1400 W 4 ohms: 750 W 8 ohms: 575 W* Bridged Mono Operation, 20 Hz to 20 kHz J�2500 4 ohms: 2500 W 8 ohms: 1500 W Note: Power ratings are specified at 120 VAC line voltage.* Power Bandwidth - 5 Hz to 50 kHz (+0, -3 dB)* Frequency Response - 25 Hz to 25 kHz (+0, -1 dB)* Distortion THD and SMPTE IMD; 20Hz to 20kHz < 0.03% @ 8 ohms* Signal-to-Noise Ratio > 100 dB below rated power into 4 ohms* Channel Separation > 90 dB @ 1 kHz* Damping Factor > 300 @ 1 kHz and below* Input Impedance 20 kO balanced 10 kO unbalanced* Input Sensitivity 1.15 V (+3.4 dBu) for rated power into 4 ohms* Gain J�2500: 34 dB* Maximum Input Level 9.75 Vrms (+22 dBu)* Turn On Delay 2.5 seconds* Subsonic Filter 9 dB @ 30 Hz* Topology J�2500: Class H* Cooling > 90 dB @ 1 kHz* Channel Separation Dual variable-speed fans with back to front airflow Indicators Channels A and B SIG (Signal Present), OL (Overload) POWER* Current Consumption J�2500 Idle 1.0 A Musical Program @ 8� 8.1 A Musical Program @ 4� 10.0 A Musical Program @ 2� 17.2 A* AC Power Requirements U.S. 120 VAC, 60 Hz Europe 240 VAC, 50 Hz Japan 100 VAC, 50/60 Hz Korea 220 VAC, 60 Hz* Physical Dimensions and Weight Height: 3.5 in/89 mm Width: 19.0 in/483 mm Depth: 15.7 in/400 mm* Weight: J�2500: 56.2 lb/25.5 kg |
