Optimised for demanding DJ bass heavy PA systems, the PV-DJ V2600 Peavey power amplifiers are 900w RMS (1800w program) power per channel at 4 ohms. The Peavey PVDJ V2600 PA power amplifier is perfect for DJs live bands, clubs, discos and any PA system where big bass punch is needed. In compact 2 U rack size, the Peavey PV-DJ V2600 PA power amplifier is massive power in a small package.The PVDJ V2600 works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for bass subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power sub bass speakers and the higher frequencies are sent to the HIGH OUT jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the THRU LOW OUT jack sockets for connection to a second separate sub power amplifier in multi sub bass speaker applications if required.Power Output: 4 ohms 900w RMS / 1800w program per channel Power Output: 8 ohms 550w RMS / 1100w program per channel Power Output Bridge Mode: 8 ohms 1800w RMS / 3600w program DDT� COMPRESSION ++: Automatic, switchable with LED indicator COOLING SYSTEM: Two-speed DC fan, air flow back to front LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation INPUTS ++: Electronic balanced; Barrier Strip, XLR, TRS 1/4 (6.3 mm) CROSSOVER OUTPUTS ++: Low/Thru and High, TS 1/4 (6.3 mm) AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter DIMENSIONS: Height: 2 U rackmount 3.5 (8.9 cm), Width: 19 (48.3 cm), Depth: 15.5 (38.0 cm) |
