 | | Description | 
 | The MiniMAC Wash is an automated moving-head Fresnel washlight that provides 12 dichroic color filters, high-speed mechanical shutter, 540° of pan by 270° of tilt, user selectable 23° or 40° soft-edged beams, 3-digit LED control panel, and switch-selectable power supply settings. It uses a 150 watt discharge source and may be operated with DMX controllers, the Martin MC-1 remote control, and as a stand-alone unit with programmable 7-scene sequence, random action, and master/ slave capability. | |
| | Physical |
| Length: 390 mm (15.4 in) |
| Width: 316 mm (12.4 in) |
| Height: 415 mm (16.3 in) |
| Weight: 11.6 kg (25.5 lbs) | | | | | Source |
| Lamp: 150 W discharge |
| Approved models: Martin Metal Halide, Osram HTI |
| Base: GY 9.5 |
| Control: remote switchable | |
| | Photometrics (Standard) |
| Light output: 2600 lumens |
| Illuminance (lux or fc): 15,203 cd/distance2 (m or ft) |
| Diameter: 0.73 x distance |
| Field angle: 40.1° |
| Measurement conditions: 230 V, 50 Hz; no effects applied |
| Measurement source: Martin Metal Halide 150 | | | | | Photometrics (Optional) |
| Light output: 2500 lumens |
| Illuminance (lux or fc): 48,384 cd/distance2 (m or ft) |
| Diameter: 0.42 x distance |
| Field angle: 23.5° |
| Measurement conditions: 230 V, 50 Hz; no effects applied |
| Measurement source: Martin Metal Halide 150 | |
| | Electromechanical effects |
| Color wheel: 12 colors + open, continuous rotation |
| Shutter: variable strobe up to 11.4 Hz |
| Pan: 540° in 0.013° steps |
| Tilt: 270° in 0.007° steps | |
| | Control & Programming |
| Control options: DMX-512, MC-1, stand-alone, master/slave |
| Stand-alone triggers: music, internal timer |
| Stand-alone programs: automatic and programmable 7-scene sequence |
| Receiver: RS-485 |
| Setting and addressing: 3-digit LED control panel, remote w/ uploader |
| Firmware update: serial upload (MUF) |
| DMX speed control: tracking and/or vector |
| DMX channels: 4 - 8 |
| Pan/tilt resolution: 8- and 16-bit |
| Data I/O: locking 3-pin XLR, pin 1 shield, pin 2 cold (-), pin 3 hot (+) | |
| | Installation |
| Mounting points: 1 pair of 1/4-turn locks for clamp bracket |
| Orientation: any |
| Minimum distance to combustible materials: 0.3 m (12 in) |
| Minimum distance to illuminated surfaces: 0.3 m (12 in) |
| Minimum clearance around fan and air vents: 0.1 m (4 in) |
| Minimum center-to-center installation distance: 316 mm (12.4 in) | |
| | Thermal |
| Maximum ambient temperature (Ta): 40° C (104° F) |
| Maximum surface temperature: 60° C (140° F) |
| Total heat dissipation: 700 Btu/hr | | | | | AC Supply |
| AC input: 3-pin IEC male socket |
| Power supply options: 100/120/210/230/250 V, 50/60 Hz (switch-selectable) | |
| | Maximum power and current |
| 100 V: 220 W, 2.7 A |
| 120 V: 210 W, 2.0 A |
| 210 V: 200 W, 1.3 A |
| 230 V: 200 W, 1.1 A |
| 250 V: 210 W, 1.0 A | | | | | Design standards |
| EU EMC: EN 50 081-1, EN 50 082-1 |
| EU safety: EN 60598-1, EN 60598-2-17 |
| Canadian safety: CSA C22.2 No. 166 |
| US safety: ANSI/UL 1573 | |
| | Construction |
| Housing: UV-resistant fiber-reinforced composite |
| Finish: integral black color or polyurethane coating |
| Available colors: black, white, titanium |
| Protection factor: IP 20 | |
| | Ordering information |
| MiniMAC Wash, in cardboard, black: P/N 90230400 |
| MiniMAC Wash, in cardboard, white: P/N 90230430 |
| MiniMAC Wash, in cardboard, titanium: P/N 90230432 | | | | | Accessories |
| G-clamp: P/N 91602003 |
| Half-coupler clamp: P/N 91602005 |
| Pantograph bracket: P/N 91602006 |
| Flush-mount bracket: P/N 91606009 |
| 2-unit flight case: P/N 91510007 | |
| | Included items |
| Lamp: Martin Metal Halide 150, P/N 97010107 |
| Mains cable: 3 m, 3-pin IEC, P/N 11501013 |
| Data cable: 5 m, black, 3-pin XLR, P/N 11820008 |
| Clamp attachment bracket: P/N 56600016 |
| Safety cable eye bolt: P/N 08131901 |
| User manual: P/N 35000084 | |
| | Sample project specification |
| General
The luminaire shall be an automated moving head Fresnel washlight employing a 150 watt discharge lamp as the light source. |
| Mechanical effects
The luminaire shall provide one wheel with 12 fixed dichroic glass color filters and an open position. The color wheel shall rotate continuously and shall be positionable between filters. The luminaire shall provide a mechanical shutter to open and close the light output .The shutter shall provide variable speed strobe effects at up to 11 flashes per second. The head of the luminaire shall rotate 289° on the tilt axis. It shall be mounted on a single arm that rotates 540° on the pan axis. |
| Control
The luminaire shall respond to command signals from USITT DMX512 compatible control devices and the Martin MC-1 remote control unit. For serial data transfer, one 3-pole male and one 3-pole female XLR socket shall be provided. The luminaire shall provide an automatic stand-alone mode with user-definable pan and tilt range, and a programmable stand-alone mode with up to seven sequential scenes. The automatic stand-alone mode shall be sound-activated or self-activated at user option. All user-selected software settings shall be adjustable via an onboard control panel with LED display or via a remote control unit. Firmware updates shall be installable from a remote location via a serial upload. |
| Performance
The luminaire shall emit a luminous flux of 2600 lumens in a 40° soft-edged field when fitted with a new lamp. |
| Housing
The exterior of the luminaire shall be constructed of high temperature UV-resistant fiberglass-reinforced nylon. The housing shall provide a protection factor of IP 20. The exterior shell color shall be black, titanium, or white. |
| Installation
The luminaire shall operate in any orientation. It shall be furnished with a bracket to which a mounting clamp may be bolted. The bracket shall attach to the base with quarter-turn fasteners. When installed above floor level, secondary attachment shall be fastened to the base of the luminaire. |
| Electrical
The luminaire shall provide switch-selectable settings for operation on 50 and 60 Hz supplies at 100, 120, 210, 230, and 250 volts. It shall be fitted with a three-prong male IEC socket for connection to AC power. The luminaire shall be electrically grounded. The luminaire shall conform to CE safety standards EN 60598-1 and EN 60598-2-17, and to CE electromagnetic compatibility standards EN 50 081-1 and EN 50 082-1. The luminaire shall be cETL certified for compliance with CSA standard C22.2 No. 166, and ETL certified for compliance with ANSI/UL standard 1573. (Certification pending.) |
| Environmental
The luminaire shall be located in a dry area in which the ambient temperature does not exceed 40° C (104° F). |
| Physical
Size: 390 x 316 x 415 mm (15.4 x 12.4 x 16.3 in.) Weight: 11.6 kg (25.5 lbs) | |
