| MAC 250 Krypton | Specifications | |
The MAC 250 Krypton is a high performance profile with a separate gobo and color wheel, an achromatic lens system and a rotating prism. |
| | | | Features | | · | 250 W long life discharge lamp | | · | 12 position color wheel plus open | | · | Motorized focus | | · | Mechanical dimming | | · | 7 indexable rotating gobos plus open | | · | Interchangeable rotating prism | | · | Rapid strobe effects (up to 14 Hz) | | · | Pan and tilt range of 540°/257° | | · | Quiet operation | | · | Modular design for easy maintenance and servicing | | |
Physical |
| Length: 375 mm (14.8 in.) |
| Width: 315 mm (12.4 in.) |
| Height: 538 mm (21.2 in.), head straight up |
| Weight: 22.4 kg (49.4 lbs.) |
Lamp |
| Type: 250 W discharge |
| Fitted as standard: Philips MSD 250/2 |
| Color temperature: 8000 K |
| CRI (Color rendering index): >85 |
| Average lifetime: 3000 hours |
| Hot restrike: No |
| Socket: GY 9.5 |
| Ballast: Magnetic |
| Approved alternative lamp(s): Osram HSD 250/80, GE CSD 250/2 |
Dynamic Effects |
| Color wheel: 12 colors (incl. CTC) + open, full and split positions, continuous rotation |
| Rotating gobo wheel: 7 interchangeable gobos + open, indexing, continuous gobo rotation, shake, continuous scrolling |
| Prism: Interchangeable 3-facet rotating prism |
| Mechanical dimmer: 0 - 100% |
| Shutter: Strobe effect up to 14 Hz, pulse effects, instant open and blackout |
| Focus: 2 m (6.6 ft.) to infinity |
| Pan: 540° |
| Tilt: 257° |
Control and Programming |
| DMX channels: 14/17 |
| Setting and addressing: Control panel with LED display |
| 16-bit control: Color wheel, rotating gobos, dimmer, focus, pan and tilt |
| Movement control options: Tracking and vector |
| Protocol: USITT DMX512/1990 |
| Receiver: Opto-isolated RS-485 |
| Firmware update: Serial upload via DMX link |
Construction |
| Color(s): Black |
| Housing: UV-resistant fiber-reinforced composite |
| Reflector: Glass, cold light |
| Protection rating: IP 20 |
Gobos |
| Outside diameter: 22.5 mm (0.9 in.) + 0/- 0.3 mm (0.01 in.) |
| Maximum image diameter: 17 mm (0.7 in.) |
| Maximum thickness: 1.8 mm (0.1 in.) |
| Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminum coating |
| Recommended metal: Aluminum (steel for temporary use only) |
Installation |
| Mounting points: 2 pairs of 1/4-turn locks |
| Orientation: Any |
Connections |
| AC power input: 3-pin IEC |
| DMX data in/out: 3-pin and 5-pin locking XLR |
Electrical |
| AC power: 100-240 V nominal, 50/60 Hz |
| Power supply unit: User-reconfigurable voltage and frequency settings |
| Main fuse: 6.3 AT (slow blow) |
Thermal |
| Cooling: Filtered forced air (temperature-regulated) |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Maximum surface temperature, steady state, Ta=40° C: 160° C (320° F) |
| Total heat dissipation (calculated, +/- 10%): 1120 BTU/hr. |
