| CX-10 Extreme | Specifications | |
The CX-10 is a powerful 250 W color changer with 12 interchangeable colors, an effect wheel and animation system. |
| | | | Features | | · | 250 W discharge lamp | | · | 3000 hour lamp included | | · | 12 interchangeable colors plus open | | · | 13 position dual gobo & effect wheel | | · | Motorized focus | | · | 22° (optional 14° or 32°) | | · | Animation disk adaptor with morphing effects | | · | Variable frost effect | | · | Separate shutter for strobe effect | | · | All major safety approvals CE, ETL and CETL | | · | Rigorously tested for total reliability | | · | DMX control | | · | Continuous operation - no cool down time needed | | |
Physical |
| Length: 412 mm (16.2 in.) |
| Width: 340 mm (13.4 in.) |
| Height: 326 mm (12.8 in.) |
| Weight: 19 kg (41.9 lbs.) |
Lamp |
| Type: 250 W discharge |
| Fitted as standard: Philips MSD 250/2 |
| Color temperature: 8500 K |
| Average lifetime: 3000 hours |
| Socket: GY 9.5 |
| Approved alternative lamp(s): Osram HSD 250, Philips MSD 200 |
Dynamic Effects |
| Color wheel: 12 colors (incl. UV transmitter) + open, full and split positions, random color, continuous rotation |
| Effect wheel: Double-sided, each side with 12 interchangeable gobos or filters + open |
| Gobo animation: Interchangeable animation wheel (accessory), can replace or be attached to color wheel |
| Shutter: 0 - 100% continuous dimming, variable & random strobe & pulse effects, instant open & blackout |
| Frost: Motorized |
| Focus: Motorized, 2 m (6.6 ft.) to infinity |
Control and Programming |
| Control options: DMX |
| DMX channels: 10 |
| Setting and addressing: Control panel with LED display |
| Protocol: USITT DMX512/1990 |
| Receiver: Opto-isolated RS-485 |
| Firmware update: Serial upload via DMX link |
Photometric Data |
| Beam angle: 22° (14° narrow or 32° wide options available) |
Construction |
| Housing: Polyester-reinforced composite |
| Color(s): Black |
| Protection rating: IP 20 |
Gobos |
| Outside diameter: 22.5 mm (0.9 in.) + 0/- 0.3 mm (0.01 in.) |
| Maximum image diameter: 17 mm (0.7 in.) |
| Maximum thickness: 1.8 mm (0.1 in.) |
| Glass type: High-temperature Borofloat or better |
| Glass coating: Dichroic or enhanced aluminum |
| Metal: Aluminum (steel for temporary use only) |
Installation |
| Orientation: Any |
| Mounting points: Floor or adjustable mounting bracket |
Connections |
| Data connection: 3-pin locking XLR |
| Power cable entry: 3-pin IEC |
Electrical |
| AC power: Switch-selectable 100-120/208-240 V nominal, 50/60 Hz |
| Main fuse: 6.3 AT (slow blow) |
Thermal |
| Maximum ambient temperature (Ta max.): 40° C (104° F) |
| Maximum surface temperature, steady state, Ta=40° C: 50° C (122° F) |
| Typical heat dissipation (calculated): 1230 BTU/hr. |
|
