dbx 1215 Specifications * INPUT Connectors: 1/4 TRS, female XLR (pin 2 hot), and barrier terminal strip * Type: Electronically balanced/unbalanced, RF filtered Impedance: Balanced 40 kOhms, unbalanced 20 kOhms * Maximum Input Level: >+21dBu balanced or unbalanced * CMRR: >40dB, typically >55dB at 1kHz * OUTPUTS Connectors: 1/4 TRS, male XLR (pin 2 hot), and barrier terminal strip * Type: Impedance-balanaced/unbalanced, RF filtered * Impedance: Balanced 200 ohm, unbalanced 100 ohm * Maximum Output Level: o >+21dBu balanced/unbalanced into 2 kOhm or greater o >+18dBm balanced/unbalanced (into 600 ohms) * SYSTEM PERFORMANCE Bandwidth: 20Hz to 20kHz, +0.5/-1dB * Frequency Response: <10Hz to >50kHz, +0.5/-3dB * Dynamic Range: o +/-15dB range: 109dB o +/-6dB range : 115dB * Signal-to-Noise: o +/-15dB range: 90dB o +/-6dB range : 97dB * THD + Noise: <0.005% * Interchannel Crosstalk: <-80db, 20Hz to 20kHz * FUNCTION SWITCHES EQ Bypass: Bypasses the graphic equalizer section in the signal path * Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter * Range (recessed): Selects either +/- 6dB or +/- 15dB slider boost/cut range * INDICATORS Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu * EQ Bypass: 1 LED: Red * Clip: 1 LED: Red * Low Cut: 1 LED: Red * +/-6dB: 1 LED: Yellow * +/-15dB: 1 LED: Red * POWER SUPPLY Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz 230VAC 50/60Hz * Power consumption: 24W * Main Connection: IEC receptacle * PHYSICAL Dimensions: 3.5 H X 19 W X 7.9 D (8.9cm x 48.3cm x 20.1cm) * Weight: 8.5 lbs. (3.9 kg) * Shipping Weight: 9.5 lbs. (4.3 kg) Note: Specifications subject to change witho |
