Specifications:Output power: 230W continuous @4 Ohm 20Hz-20kHz 205W continuous @8 Ohm 20Hz-20kHz(Bridge mono) 430W continuous @8 Ohms 20-20kHzFrequency response: 20hz - 20kHz �0.1dB @1WPhase response: �10� from 10Hz - 20kHz @1WSignal to Noise Ratio: >105dB 20Hz - 20kHz below rated output at 26dB gainTHD: <0.05% from 20Hz to 1kHz and increasing linearly to <0.1% at 20kHz, @ 170W into 8 Ohms per channelIM Distortion: <0.05% from 10mW to 170W at 26dB gainDamping factor: >1000 from 10Hz to 400HzSlew rate: >13 volts per microsecond (stereo)Voltage gain: 20:1 �3% or 26 dB �0.25dBMains power: 100/120/220/230/240 VAC 50/60HzDimensions: 2u 19 standard rack mount x 406mm deepWeight: 14kg�Patented ODEP (Output Device Emulation Protection) circuitry compensates for overheating and overload �Switchable gain match selects 0.775V or 1.4v input �Two mono modes (Bridge-Mono and Parallel-Mono) for driving a wide range of load impedances and cable lengths �Full protection against shorted outputs, open circuits, mismatched loads, general overheating, high frequency overloads. Loudspeaker protection against low frequency and DC output. |
